32口加 WDM High power EDFA specification
High Power EDFA for FTTH / FTTB
CATV-1500 Series EDFA
Application:
◆Analog CATV Transmission
◆FTTH Optical Access
◆Optical Distribution
◆Free Space Optical
◆R&D and Training
Feature
◆High Power：Up to 2W total，1 Unit for 2000～4000 optical node
◆Low Noise Figure：Below 5.5dB ( +5dBm input)
◆Er Yb co-doped DCF Amplify Technology：Patent Pump Dump Technology
◆Low CSO: ＜-70dBc
◆23dBm×N，20dBm×N or 17dBm×N output is optional
◆Controllability and maneuverability: Dual CPU to deal Control loop and Communication separately
◆High Stability And Reliability：MTTF＞150000 Hours
◆Redundancy Hot Swap power module: 110/220VAC and 48VDC can plug Mix
◆Perfect Network Interface：Ethernet, RS-485 and RS-232 port
◆Support Telnet and SNMP network management
◆Intelligent Temperature Control System: using a dedicated Temperature control chip which make cooling and power loss reduce 30% than competitors
◆Output Power can be Adjustable by network and manual
◆Integrated 1310nm，1490nm，1550nm WDM (Optional)
◆OEM, Module is available
Description:
The product is high output power C-Band Er-Yb co-doped double cladding optical fiber amplifier. The key components of the product are high reliability multimode PUMP laser and the double cladding optical fiber. A proprietary ATC (Automatic Temperature Control) and APC (Automatic Power Control) circuit insures the high stability and reliability output power, the unique optical circuit design ensures the excellent optical performance. The high stability and high precision MPU system to ensure the control, adjustment and display are intelligent and easy.
This amplifier employ double cladding Erbium Ytterbium co-doped fiber, and employ the high power multimode pump, with a 10 times Conversion efficiency higher than the single mode general technology, and therefore have a lower relative cost and more compact size and lower power consumption, in particular, for FTTH or FTTB or other large distribution system applications.
Employ intelligent temperature control system: (1)Adopt special temperature control circuit，heat radiating and power consumption can be reduced 30%, (2)The professional air flow design can also ensure the best temperature stability, at the same time powerful fan will start when the case temperature is over 45℃, meanwhile it will stop as the temperature is under 40℃.The technology makes sure the thermal stability of system and fan’s long life.
Intelligent network management system. Perfectly network interface: Ethernet, RS-485 and RS-232 network，and the open network management interface ensure the connectivity with all other network management system.
These products are widely used in CATV transmission system and the high power distributing system FTTH requirement. It can be used for CATV analog/digital signal distribution, or match with PON system to construction the triple network integration. (Triple wavelength WDM is optional)
Block Diagram
Amplifying Unit
Optical characteristics
Parameter Symbol MIN TYP MAX UNITS
Operating Wavelength λc 1540 1550 1565 nm
Saturated Output Power Note1 Po 13 —— 33 dBm
Input Power Pi -3 —— +10 dBm
Gain G —— —— 30 dB
Noise Figure Note2 NF —— —— 6 dB
Output Power Stability ΔPo —– ±0.05 ±0.2 dB
Input Isolator ISOi 30 ——- —— dB
Output Isolator ISOo 30 ——- —— dB
Input Pump Leakage PLi ——- ——- -35 dBm
Output Pump Leakage PLo ——- ——- -45 dBm
Return Loss RL ——- ——- -45 dB
Polarization Dependent Gain PDG —— ——- 0.3 dB
Polarization Mode Dispersion PMD —— ——- 0.5 ps
Note 1：Optional
Note 2：Tested at +5dBm Input
Environmental characteristics
Parameter Symbol MIN TYP MAX UNITS
Operating Temperature Tw -5 —– 60 ℃
Storage Temperature Ts -40 —– 80 ℃
Humidity Note —— 10 —— 90 %
Note: No Condensate
Electrical Characteristics
Parameter Symbol MIN TYP MAX UNITS
Power Supply（1） Vps 170 264 VAC
Power consumption P —– —– 50 W
（1）: 110VAC，220VAC and -48VDC is optional, and duplicate supply is optional.
■Order Information
Category Application Input power — Output power of port — ports Power supply1 Power supply2 Interface Network Management
HA21 1 X － 20 － 64 2 4 2 0
2U Rack, Dual power supply 1：CATV
2: DCM
3.Telecom single channel
4:Telecom DWDM
5:Wide Band single Channel 1:-3~+10dBm；
2:+5~+15dBm；
3:0~+10dBm；
4:-8~+10dBm；
5:-35dBm~-25dBm(Pre)；
6:-25dBm~-10dBm(Online)；
7:-10dBm~+6dBm(Booster)；
9:Other 13：13dBm 1:1 port 1：110VAC 1：110VAC 1:SC/UPC 0：None
32:32ports 2：220VAC 2：220VAC 2:SC/APC 1：SNMP
24:24dBm 64:64ports 4：-48VDC 4：-48VDC 3:FC/UPC
0: None 4:FC/APC
5:LC/UPC
6:LC/APC
HA1100 for 1U rack，Maxim ports number： 16（w/ WDM），or 32（w/o WDM）
Note 2：High End configure with SNMP Net management, with standby switch function by RS485 connect.
